Yet another nice package from Blastwave.
This one comes thanks to the hard work of Ihsan Dogan.
Here is some sample output reading data from SCSI disks :
bash-2.05# /opt/csw/sbin/smartctl -a /dev/rdsk/c1t5d0s0
smartctl version 5.33 [sparc-sun-solaris2.8] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: SEAGATE ST373307LC Version: 0004
Serial number: 3HZ0S9CV000073305V4G
Device type: disk
Transport protocol: Parallel SCSI (SPI-4)
Local Time is: Sun Dec 12 18:23:09 2004 EST
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK
Current Drive Temperature: 39 C
Drive Trip Temperature: 68 C
Vendor (Seagate) cache information
Blocks sent to initiator = 993002716
Blocks received from initiator = 899943847
Blocks read from cache and sent to initiator = 245609927
Number of read and write commands whose size <= segment size = 18165962
Number of read and write commands whose size > segment size = 325464
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 8040.65
number of minutes until next internal SMART test = 70
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 283496 0 0 283496 283496 638.215 0
write: 0 0 0 0 0 479.930 0
verify: 132 0 0 132 132 1.378 0
Non-medium error count: 522
Error Events logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 6 - [- - -]
# 2 Background short Completed - 6 - [- - -]
# 3 Background short Completed - 1 - [- - -]
# 4 Background short Completed - 1 - [- - -]
Long (extended) Self Test duration: 1488 seconds [24.8 minutes]
Dennis Clarke Admin and Director for blastwave.org
dclarke @ blastwave.org Home of CSW - Community Software for Solaris